SPECIFICATIONSFilm Thickness: 110 μmRelease Liner Thickness: 142 μmFilm Type: High-grade polymeric calendered film with air-release technologyAdhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease Liner: Plastic linerStorage Period: 2 years when stored between +10°C to +20°C, relative humidity 50%, in the original package, away from direct sunlight, in a clean and dry place. Important: Remove the top protective layer before installation, and store the film without it to prevent “tunneling.”Durability/Warranty: Refer to the datasheet (click the link for more details).Adhesion and Performance TestsRelease Force (N/25mm): Standard 0.10-0.30, Result 0.18 (23°C, 54% RH)Initial Tack (g/25mm): Standard 800-1500, Result 1015 (23°C, 54% RH)180° Peel Strength (N/25mm): Standard ≥4.9, Result 8.1 (23°C, 54% RH)Adhesion Strength: Standard ≥60, Result 70 (no shifting)Aging Tests:High Temperature (65°C, 7 days): No adhesive residueLow Temperature (-65°C, 10 days): No adhesive residueInstallation TipsApplication Temperature: +18°C to +22°CUsage Temperature Range: -30°C to +45°CTools Required: Standard squeegee with a soft bufferConformability: Suitable for smooth and medium-curved surfacesDirectional: NoOverlap Width: 3-4 mmPost-Heating Temperature: 95°CImportant: Peel off the protective cap before installation.NotesImages, colors, and finishes shown on screen are approximate. Always refer to a physical color swatch for an accurate representation.Use rolls from the same production LOT number to avoid slight batch-to-batch color variations.The film may scratch during application or daily use. Scratching is not covered under the warranty.This wrap offers superior performance and aesthetics for professionals and DIY enthusiasts alike. Order now and take your projects to the next level!