Description

Technical Specifications

• Film Thickness: 110 μm

• Release Liner Thickness: 142 μm

• Film Type: High-grade polymeric calendered vinyl with air-release channels

• Adhesive: Henkel solvent-based acrylic; ultra-weather-resistant; viscosity: 1000–3000 cps; dry adhesive thickness: 12 μm

• Release Liner: High-gloss plastic liner

Storage & Durability

• Shelf Life: 2 years (stored at +10°C to +20°C, 50% RH, in original packaging, away from sunlight)

• Important: Remove the PET protective layer before installation. Do not store the film with the cap to prevent tunneling.

• Warranty: Refer to the official datasheet for complete details

Performance Testing

Aging Test Results

• High Temperature (65°C, 7 days): No adhesive residue

• Low Temperature (-65°C, 10 days): No adhesive residue

Installation Guidelines

• Application Temperature: +16°C to +18°C

• Usage Temperature Range: -30°C to +45°C

• Tools Required: Standard squeegee with soft buffer

• Conformability: Smooth and medium curved surfaces

• Directionality: Non-directional

• Overlap Width: 3–4 mm

• Post-Heating Temperature: 95°C

⚠️ Always remove the PET protective cap before heat application during installation.

Packaging

• Roll Width: 152 cm

• Available Lengths: 15m

Important Notes

• Colors and finishes displayed on-screen are approximate. Always verify with a physical color swatch for accurate reference.

• Use rolls from the same LOT number to ensure color consistency across full wraps.

• While durable, the film may develop minor surface scratches during installation or use. These are not covered under warranty.